90mm DIA Magnet Mount – 2.4G WIFI Antenna Base with SMA-Plug Connector & RG58 Cable

Characteristic
This system uses a three-in-one integrated design, including a 90mm diameter N50-grade NdFeB magnetic base, a 2.4GHz omnidirectional radiator, and a 1.5-meter low-loss RG58 coaxial transmission line. The magnetic unit has passed the military standard MIL-STD-810G vibration test and uses a Type III hard anodized surface treatment. It can maintain a vertical adsorption force of ≥180kgf at a speed of 120km/h. Combined with a 3mm thick magnetic steel sheet, it can achieve stable installation on multiple curved surfaces such as the roof and hood.

Core Performance‌
The system is CE/RoHS certified, comes standard with a UV-resistant silicone sleeve, and comes with 3M™ VHB double-sided tape pre-attached to the bottom of the magnet, making it compatible with mixed metal/non-metal surface installation. The innovative eddy current suppression design effectively reduces signal fluctuations during high-speed movement, improving mobile reception stability by 28% compared to traditional magnetic antennas.

NOTICE

During the installation process, avoid any collisions.

It is strictly prohibited to disassemble the antenna components; otherwise, it may lead to poor antenna performance.

The installation position of the antenna should be free of any obstructions.

When used outdoors, it is necessary to equip with lightning protection facilities.

may contain electronic components. Do not discard them randomly.