Combination Antenna with 110mm Magnetic Base Mount – N Male Connector + 4m RG58 Cable

Characteristic
This system adopts a modular design concept, integrating a 110mm diameter super-strong magnetic chassis, a multi-band combined radiation unit and a 4-meter low-loss RG58 coaxial transmission line. The magnet assembly uses N52-grade sintered NdFeB ring magnetic array, combined with a 5mm thick electrical pure iron magnetic plate. The measured adsorption force reaches 320kgf, which can withstand aerodynamic loads at a speed of 160km/h. The surface is treated with micro-arc oxidation to achieve 500 hours of salt spray protection.

Core Performance‌
The system is EN 61000-6-2/3 EMC certified, and a conductive rubber pad is pre-installed on the bottom of the magnet to ensure complete RF grounding with the vehicle body. Innovative frequency band adaptive technology automatically optimizes the radiation pattern based on the surrounding electromagnetic environment, increasing channel capacity by 42% compared to traditional combination antennas.

NOTICE

During the installation process, avoid any collisions.

It is strictly prohibited to disassemble the antenna components; otherwise, it may lead to poor antenna performance.

The installation position of the antenna should be free of any obstructions.

When used outdoors, it is necessary to equip with lightning protection facilities.

may contain electronic components. Do not discard them randomly.